It’s a familiar scene: you’re slumped over your keyboard or notebook, obsessing over your character. While we tend to agonize over everything from structure to backstory, it’s important to weigh how you write something too. A perfectly constructed world is flat on the page if you use feeble, common words. When you’re finished constructing your perfectly balanced world, do your writing a favor and take another pass to weed out these 18 haggard words.
High on any list of most used English words is “good.” While this word may appear to be the perfect adjective for nearly anything, that is precisely what makes it so vague. Try getting more specific. If something’s going well, try “superb,” “outstanding” or “exceptional.”
Another of the common words in English is “new.” “New” is an adjective that doesn’t always set off alarm bells, so it can be easy to forget about. Give your writing more punch by ditching “new” and using something like “latest” or “recent” instead.
Much like “new,” “long” is spent, yet it doesn’t always register as such while you’re writing. Instead of this cliché phrase, try describing exactly how long it is: “extended,” “lingering” or “endless,” for example.
“Old” is certainly one of those common words that means more to readers if you’re specific about how old a subject is. Is it “ancient,” “fossilized,” “decaying” or “decrepit”?
“Right” is also among the common words that tends to slip through our writer filters. If somebody is correct, you could also say “exact” or “precise.” Don’t let habit words like “right” dampen your writing.
Here’s another adjective that falls a bit flat for readers, but can also easily be improved by getting more specific. Saying something is “odd” or “uncommon” is very different than saying it is “exotic” or “striking.”
“Small” is another adjective that is too generic for writing as good as yours. Use “microscopic,” “miniature” or “tiny” instead. Even using “cramped” or “compact” is more descriptive for your audience.
Just like relying too much on “small,” we tend to describe large things as, well, “large.” Specificity is a big help with this one too: could your subject be “substantial,” “immense,” “enormous” or “massive”?
Whenever we describe something coming “next,” we run the risk of losing our readers. Good options to make your reading more powerful include “upcoming,” “following” or “closer.”
Another case of being too generic is what makes “young” a problematic adjective. If you want your writing to be more captivating, try switching “young” out for “youthful,” “naive” or “budding.”
“Never” is also among common words to use sparingly. Not only is it a common, stale descriptor, it’s also usually incorrect. For something to never happen, even one instance makes this word inaccurate. Try “rarely,” “scarcely” or “occasionally” instead.
“Things” is another repeat offender when it comes to worn out words. Another word where specificity is the key, try replacing “things” with “belongings,” “property” or “tools.”
Just like “never,” “all” is an encompassing, absolute term. Not only is “all” unoriginal, it’s not usually factual. Try using “each” and “copious” instead.
“Feel” is also in the company of common English words. Try using “sense,” or “discern” instead. You can also move your sentence into a more active tense: “I feel hungry” could become “I’m famished,” for example.
“Seem” is bad habit word we are all guilty of using. Regardless of how well you think your sentence is constructed, try switching “seem” out for “shows signs of.” “Comes across as” is another good option to give your writing more power.
Another easy adjective to let slip by, “almost” is a wasted opportunity to engage your readers. “Almost” is more interesting if you say “practically,” “nearly” or “verging on” instead.
“Just making” it or “just barely” affording something isn’t very descriptive. To truly grab a reader, we must do better. Try “narrowly,” “simply” or “hardly” to give your phrasing more weight.
Last but not least, avoid using the common word “went” to describe your subject. “Went” is a word that lacks traction. Try using “chose,” “decided on” or “rambled” to truly grab your readers.
Hello, everyone. I hope all of you experienced a great week. Today I’m giving you a blog that discusses how you can broaden your story and your readership from an article by Bharti Kirchner. This was originally published in the Writer magazine.
Why venture into unaccustomed territory when it comes to characters? In a globalized world, re regularly meet people.e very different from us in race, class, ethnicity, religion, politics or ideology. Modern novels and memoirs, as mirrors of a society, increasingly depict this heterogeneity.
In addition to expanding our readership, a diverse character, whether the protagonist or a secondary character brings a broader voice to a story. In the case of the novel Tulip Season, protagonist Mitra meets a mysterious German man, and the contrast between the two adds an element of tension. With dissimilar actions, attitudes and world views, backgrounds and upbringings, their interactions spark a great exploration of Mitra’s world.
Creating Authenticity: How do you get started writing about a person foreign to you? By immersing yourself in that particular culture of community through direct contact and by building relationships. Armchair travel can also help, as can books, videos, movies, art, and the Web. Remember, in the end, it’s your story and it’s fiction. You’re facing challenges no matter what. “If you’re going to write fiction, you’re going to write about people who aren’t you,” says David Guterson, author of 10 books, including Snow Falling on Cedars. “You should feel some healthy trepidation about that.”
Respect, openness, and empathy are keys to depicting an unfamiliar culture or perspective. Here are additional tips and techniques.
First Impressions: What a reader first notices is how the character looks, dresses, sounds and behaves. Bring the character alive with physical descriptions, but not too much and not all at once. Allow readers to use their imagination to fill in the blanks. Pay special attention to the rhythm of the spoken language. A foreign born person might speak with an accent and fall back on native words as necessary.
A Character from Inside Out: You’re writing about individuals, and the methods you usually employ to develop a character of any kind still applies. Remember that all cultures have hopes, fears, and dreams, and it’s your job to portray that.
Does a diverse character have to be sympathetic? Peter Mountford, the author of two novels, including A Young Man’s Guide to Late Capitalism, says no. “Actually, I’m not sure he is very sympathetic because of the choices he makes,” Mountford says of Gabriel do Boys, the 26-year-old, biracial protagonist in his novel. “He builds a lucrative career instead of abandoning it for love. I feel for him, definitely, but a lot of readers struggle with him, and I suppose that is the key to writing “the other,” for me.”
Beliefs and Conflicts: Every culture or community holds common beliefs about marriage, family, money, status and friendship. A character is likely to suffer moth internal and external conflicts when going against these beliefs and sometimes even when conforming to them.
Showing Universality: By wrestling with choices and obstacles, a diverse character, like any other, grows and changes. In the process, he or she displays common human characteristics as fear, anger, joy and love. Although I’m different, I’d feel much the same in the same situation, the reader realizes, and perhaps gets more involved in the book.
You can make a character accessible in other ways. Show how he or she relates to friends. Let him or her grapple with everyday issues like traffic. An element of humor can also help. We gravitate toward people who lighten our days with a joke or a funny situation. It is in those moments that we let go of our differences and embrace our common humanity.
I hope this article helps to make your writing this week easier. The more knowledge we have the better writers we are. Blessings to all.
Hello everyone, I have been away from my blog for what seems like forever and I have missed it and my online friends. Today I want to share with you an article I read by Pete Croatto, on how to get noticed by the editors. If you want an editor it will take some work to get noticed.
Take Initiative: In an ideal world, our talent would be a siren song for editors far and wide. In a world of tight budgets and staff meetings, editors need story ideas and good ones. That means writing a pitch letter that shows you know the publication and what it wants. “What gets me to notice someone is I can notice immediately if they have a familiarity with the magazine,” says Mark Rotella, senior editor at Publishers Weekly. “They might have mentioned an article they had read or a review that they read. Usually, people are pretty specific about what section of the magazine they want to write for. Basically, if they’re pitching me about the magazine, I want to see that they’ve read it.”
Make the job Easier: Sara Benincasa, author of Real Artists Have Day Jobs ( And Other Awesome Things They Don’t Teach You in School), says it’s key to do as much work for the editor as possible without overstepping. “Don’t expect that your editor has a comprehensive knowledge of the television show or trend or book or political issue that you would like to discuss in your writing,” she says. “Provide links, easy explanations. Provide assistance without the legwork to show your editor that your pitch is for a story that will bring in views, and readers attention in a positive way.”
Follow Up: This isn’t tennis. The ball keeps moving only if you keep hitting it. If you haven’t heard back after a week or two, politely inquire so you can either start writing or send your idea elsewhere. Rotella, who has written for the New York Times and American Heritage, says the delay worked or the pitch came at the wrong time.
Try, Try Again: An editor’s disinterest or silence should not be taken as an affront. That even applies to repeat clients. “I follow up and pitch more stuff without being annoying and contacting the editor too much,” Benincasa says. “If they liked my work the first time, they will respond. If they did not like my work they will not respond. I do a pitch, I follow up once and if I don’t hear anything, I move on.” In other words, our confidence in your idea should drive you.
Look Beyond Big Names: Chances are you’re not going to make it into The New Yorker and not every profile will land in GQ. (But don’t be afraid to try.) Get published, get paid and use the clips as a down payment for more desirable venues. Write Always. That’s the only way you get better and pay your bills.
Proofread A Lot: Once you get an assignment, it’s easy to get noticed for the wrong reasons. Rotella has an aversion to writers who can’t meet deadlines or follow directions, but says, “Nothing is worse, for me than if I have to spend too much time editing because of sloppiness. That is a real discouragement.” Be professional. Proofread, fact-check and make yourself available to address any concerns your editor has.
Play Nice with Others: Veteran freelance journalist Jen A. Miller got a big assignment from a new publication when a fact-checker there remembered Miller’s work at another publication. “Sometimes that can be an incredibly tedious process,” she says. “You’re already done with a story, you don’t want to deal with it anymore, you don’t want to deal with the fact-checker, but you don’t know where that fact-checker is going to end up.”
Finally, Be Easy to Find: That comes courtesy Miller, author of Running: A Love Story and a regular contributor to The New York times and Runner’s World. She believes every writer must have a website. “It sets you up as a professional,” she says.
I do hope this article was helpful and it gave you some incite on what you need to do to snag that elusive editor. Have a blessed week.
Pacing is a crucial component of fiction writing. After all, it’s important to keep your readers “hooked” throughout your story. Whether you are just getting started in writing or looking to break into fiction writing, you’ll need to know the basics of how to pace a novel. Read today’s tip of the day from Crafting Novels & Short Stories. In this excerpt written by Jessica Page Morrell, she explains what pacing is and seven ways to keep your story moving at the right pace.
What is Pacing in Fiction?
Pacing is a tool that controls the speed and rhythm at which a story is told, and the readers are pulled through the events. It refers to how fast or slow events in a piece unfold and how much time elapses in a scene or story. Pacing can also be used to show characters aging and the effects of time on story events.
Pacing differs with the specific needs of a story. A far-reaching epic will often be told at a leisurely pace though it will speed up from time to time during the most intense events. A short story or adventure novel might quickly jump into action and deliver drama.
Pacing is part structural choices and part word choices and uses a variety of devices to control how fast the story unfolds. When driving a manual transmission car, you choose the most effective gear needed for driving uphill, maneuvering city streets, or cruising down a freeway. Similarly, when pacing your story, you need to choose the devices that move each scene along at the right speed.
Seven Literary Devices for Pacing Your Story
You need speed in the opening, middle, and climax of your story. Sure, you’ll slowdown from time to time, especially to pause for significance and to express characters’ emotions, but those times will usually appear just before or after a joyride of skin-tightening speed.
There are lots of tools to hasten your story. Some are better suited for micropacing—that is, line by line—and some are better suited for macropacing—pacing the story as a whole. Let’s take a closer look at each device.
ACTION. Action scenes are where you “show” what happens in a story, and, when written in short- and medium-length sentences, they move the story along. Action scenes contain few distractions, little description, and limited transitions. Omit or limit character thoughts, especially in the midst of danger or crisis, since during a crisis people focus solely on survival. To create poignancy, forgo long, descriptive passages and choose a few details that serve as emotionally charged props instead.
CLIFF HANGERS. When the outcome of a scene or chapter is left hanging, the pace naturally picks up because the reader will turn the page to find out what happens next. Readers both love and hate uncertainty, and your job is to deliver plenty of unfinished actions, unfilled needs, and interruptions. Remember, cliffhangers don’t necessarily mean that you’re literally dangling your character from a rooftop as the scene ends. If your characters are in the midst of a conversation, end the scene with a revelation, threat, or challenge.
DIALOGUE. Rapid-fire dialogue with little or no extraneous information is swift and captivating, and will invigorate any scene. The best dialogue for velocity is pared down, an abbreviated copy of a real-life conversation that snaps and crackles with tension. It is more like the volleying of Ping-Pong or tennis than a long-winded discussion. Reactions, descriptions, and attributions are minimal. Don’t create dialogue exchanges where your characters discuss or ponder. Instead, allow them to argue, confront, or engage in a power struggle.
PROLONGED OUTCOMES. Suspense and, by extension, forward movement are created when you prolong outcomes. While it may seem that prolonging an event would slow down a story, this technique actually increases the speed, because the reader wants to know if your character is rescued from the mountainside, if the vaccine will arrive before the outbreak decimates the village, or if the detective will solve the case before the killer strikes again.
SCENE CUTS. Also called a jump cut, a scene cut moves the story to a new location and assumes the reader can follow without an explanation of the location change. The purpose is to accelerate the story, and the characters in the new scene don’t necessarily need to be the characters in the previous scene.
A SERIES OF INCIDENTS IN RAPID SUCCESSION. Another means of speeding up your story is to create events that happen immediately one after another. Such events are presented with minimal or no transitions, leaping via scene cuts from scene to scene and place to place.
SHORT CHAPTERS AND SCENES. Short segments are easily digested and end quickly. Since they portray a complete action, the reader passes through them quickly, as opposed to being bogged down by complex actions and descriptions.
SUMMARY. Instead of a play-by-play approach, tell readers what has already happened. Because scenes are immediate and sensory, they require many words to depict. Summary is a way of trimming your word count and reserving scenes for the major events. You can also summarize whole eras, descriptions, and backstory. Summaries work well when time passes, but there is little to report, when an action is repeated or when a significant amount of time has passed.
WORD CHOICE AND SENTENCE STRUCTURE. The language itself is the subtlest means of pacing. Think concrete words (like Prodigy and iceberg), active voice (with potent verbs like zigzag and plunder), and sensory information that’s artfully embedded. If you write long, involved paragraphs, try breaking them up.
Fragments, spare sentences, and short paragraphs quicken the pace. Crisp, punchy verbs, especially those with onomatopoeia (crash, lunge, sweep, scatter, ram, scavenge) also add to a quick pace. Invest in suggestive verbs to enliven descriptions, build action scenes and milk suspense.
Harsh consonant sounds such as those in words like claws, crash, kill, quake, and nag can push the reader ahead. Words with unpleasant associations can also ratchet up the speed: hiss, grunt, slither, smarmy, venomous, slaver, and wince. Energetic, active language is especially appropriate for building action scenes and suspense, and for setting up drama and conflict.
A fast pace means trimming every sentence of unnecessary words. Eliminate prepositional phrases where you don’t need them: For example, “the walls of the cathedral” can be written as “the cathedral’s walls.” Finally, search your story for passive linking verbs and trade them in for active ones.
The following blog is from BubbleCow which I received this morning. Because of my editing on Princess Adele’s Dragon, I seem to be paying a lot more attention when I see these helpful tips. I wanted to share it. Have a blessed day. Shirley
I’m talking about that dirty word: grammar.
But more than that, I’m also talking about formatting, which is kind of like grammar for the computer-age. Bold statements aside, if you want to be taken seriously by publishers, editors, and readers, then you’ve got to get your head around formatting conventions on word processors. I often joke that you wouldn’t start playing a sport without first reading the rules. It is the same for writing. You need to be getting the basics correct; there’s no excuse. As a writer, you simply need to know this stuff.
I’m a big fan of writing software in general and favour a whole host of different word processors. However, Microsoft Word is still the industry standard, so I’ll be using that as a reference point. These rules will still apply whether you’re using Scrivener, OpenOffice, LibreOffice, or whatever your software of choice is.
OK, so with all that said, here’s the six grammar/formatting issues that drive us mad:
Ellipses – yep. They showed up last week and they’re back again. A few of you seemed unclear as to the nature of an ellipsis. Well, an ellipsis is the three dots writers use to denote an omission or to show a pause in speech. Here at BubbleCow, we often receive manuscripts where the writer has thrown in a few ellipses but with variable numbers of dots. In fact, some writers seem to think that the more dots they add, the more mysterious and tantalising their cliff-hanger becomes. “I was never there…………………… OR WAS I?” Oh dear. Ellipses only ever have three dots. No more, no fewer.
Two other things to say about ellipses. The correct way to write an ellipsis is . . . – that’s dot space dot space dot. The problem is that this plays havoc with some eBook conversion tools. Therefore, our house style is to alter them to … (three dots with no spaces). This will be picked up in the conversion process and handled correctly.
What about when an ellipsis is used at the end of the sentence? What happens to that extra full stop? Should it be three dots (…) or three and a full stop (… .). The answer is a little confusing. There’s no set rule on this, with different style guides opting for different options. At BubbleCow, our house style ignores that last full stop. Just the three dots for us, please.
Writing numbers – this, confusingly, is not another case of consistency. Now, we get hundreds of manuscripts where the writers rather sensibly choose to either use either purely numeric or purely written numbers for the entirety of their manuscripts. Then we get those who arbitrarily use a mixture of the two. Strangely, both parties are wrong in this case. Our house style (based on the Chicago Manual of Style) is as follows: numbers up to 100 must be written in words – so: one, seventeen, ninety-four. After that this becomes a little time consuming, so we allow these larger numbers to be written in digits: 1003, 784, 100,000. All you have to remember is that 100 is the magic number.
Spaces – now I know what you’re thinking. How can anyone mess up a space? Do we receive manuscripts that are just spaceless walls of interlinked words? The answer is no.
I’m talking about making sure that you’re only using one space between words. Now I know how it is – you’re writing passages, deleting them later on, shuffling around paragraphs – things get messy. But I recently ran a find-and-replace on a manuscript and it found 384 instances where two spaces had snuck in instead of one.
We’ve talked about single and double spacing before and it kicked up a bit of a storm. You see back in the olden days of typewriters and typesetting, double-spacing was standard. Those days are over! Double spaces are a nightmare for those unlucky publishers who’re in charge of creating eBooks. They mess up the formatting, resulting in unattractive, oddly-spaced electronic books that inevitably have to scrapped and redone. Our advice? Stick to one space.
Page breaks – this one is easy. The reason I’ve listed it here is because eBook conversions rely on page breaks between chapters. They will see the page break and understand that they need to do something special. If you’ve just pressed Enter a load of time to move the text to the next page you are in trouble. Not only will the conversion process potentially miss the chapter break but you’ll also lose the positioning if you then add or remove text in the chapter.
The bottom line is that you should always use a page break to go to the next page before starting a new chapter. This makes for a clean and presentable eBook, and will also help the printers if you’re going to print copies.
Paragraph breaks versus line breaks – these two phenomena might need explaining as they’re both pretty similar. Indeed, Microsoft Word didn’t start distinguishing between them until about 2003 (don’t quote me on this), but in modern word processing, the difference is very important.
OK, if you open up Word, type “BubbleCow is great,” and then press Enter, you’ll notice that the cursor jumps down to the line below, leaving some space between the previous line and the new one. This is a paragraph break. This is the one you want.
If, however, you were to hold Shift and then press Enter, the resulting new line would be right up beneath “BubbleCow is great,” with no space between them.
A great way of checking this is to use the Show/Hide Nonprinting Characters button, found on the Home tab in Word (it’s the odd black backwards P symbol). A paragraph break will show up as one of these backward-Ps, whereas a line break will be a cornering arrow. You want the P.
Line breaks are a nightmare for those in charge of formatting your masterwork – it groups all the text together, which means that text becomes harder to arrange on the page and stubborn in its disobedience. Using line breaks to create space (at the end of a chapter, for example, so you can get that page break in) can create nightmares for eBook conversions. Paragraph breaks all the way. One of the first things I do with a new manuscript is to find and replace all line breaks with paragraph breaks.
Indentation – those pesky line breaks also have a habit of messing up any system of indentation you might (should) have going. Indents only trigger on paragraph breaks, so there’s an extra reason always to paragraph break! But indents are important in their right.
Here at BubbleCow, we want the first paragraph of each chapter to be a straight flush, with the first sentence in line with the following sentences. After that, though, every paragraph needs its first line to be indented using the Tab key (not spaces! These tend to be messier and can disappear during the eBook conversion process). Again, this is one of the first things we add when we receive a new manuscript, as it helps your manuscript appear clean, streamlined, and readable. It also makes eBook versions far more attractive and is necessary for the conversion process.
This is a piece previously posted by Robbie Blair that contains useful information that I want to share with you. Since I’m in the process of doing my final edit on Princess Adele’s Dragon I found this article helped me. Maybe it can help you also. Have a blessed week. Shirley
Creating powerful prose requires killing off the words, phrases, and sentences that gum up your text. While a critical eye and good judgment are key in this process, some terms almost always get in the way. Here are eight words or phrases that should be hunted down in your story and deleted with extreme prejudice.
“Sudden” means quickly and without warning, but using the word “suddenly” both slows down the action and warns your reader. Do you know what’s more effective for creating the sense of the sudden? Just saying what happens.
I pay attention to every motion, every movement, my eyes locked on them. Suddenly, The gun goes off.
When using “suddenly,” you communicate through the narrator that the action seemed sudden. By jumping directly into the action, you allow the reader to experience that suddenness first hand. “Suddenly” also suffers from being nondescript, failing to communicate the nature of the action itself; providing no sensory experience or concrete fact to hold on to. Just … suddenly.
Feel free to employ “suddenly” in situations where the suddenness is not apparent in the action itself. For example, in “Suddenly, I don’t hate you anymore,” the “suddenly” substantially changes the way we think about the shift in emotional calibration.
“Then” points vaguely to the existing timeline and says, “It was after that last thing I talked about.” But the new action taking place in a subsequent sentence or sentence part implies that much already. You can almost always eliminate your thens without disrupting meaning or flow.
I woke up. Then I, brushed my teeth. Then I, combed my hair. Then I , and went to work.
“Then” should be used as a clarifying agent, to communicate that two seemingly concurrent actions are happening in sequence. For example, “I drove to the supermarket. Then I realized I didn’t need to buy anything.” Without the “then,” it would be easy to mistake this as pre-existing knowledge or as a realization that happened during the drive itself. “Then” can occasionally be useful for sentence flow, but keep the use of the word to a minimum.
“In order to”
You almost never need the phrase “in order to” to express a point. The only situation where it’s appropriate to use this phrase is when using “to” alone would create ambiguity or confusion.
I’m giving you the antidote in order to save you.
And after ten minutes of brainstorming for an example of a proper time to use “in order to,” I haven’t been able to come up with anything. Legitimate uses of “in order to” are just that few and far between.
“Very” and “Really”
Words are self-contained descriptors, and saying, “Think of tasty. Now think of more tasty” doesn’t help readers develop a better sense of the meal or person you’re describing.
Her breath was very coldchill as ice against my neck .
Mark Twain suggested that writers could “substitute ‘damn’ every time you’re inclined to write ‘very’; your editor will delete it and the writing will be just as it should be.” Another strategy is to find a more powerful version of the same idea or give concrete details. To say “It was very/really/damn hot” does little, but saying “It was scorching” helps. Even better?: “The air rippled like desert sky as my body crisped into a reddened, dried-out husk.”
Is, am, are, was, or were—whatever form your “is” takes, it’s likely useless. When’s the last time you and your friends just “was’d” for a while? Have you ever said, “Hey, guys, I can’t—I’m busy am-ing”?
The “is” verbs are connecting terms that stand between your readers and the actual description. This is especially true when it comes to the “is” + “ing” verb pair. Any time you use “is,” you’re telling the reader that the subject is in a state of being. Using an “ing” verb tells the audience the verb is in process. By using “is verbing,” you’re telling your audience that the subject is in the state of being of being in the process of doing something.
Take this example:
I was sprintingsprinted toward the doorway.
If the description is actually about a state of being—”they are angry,” “are evil,” or “are dead”—then is it up. But don’t gunk up your verbs with unnecessary is, am, or was-ing.
Any action a person takes is started, continued, and finished. All three of these can be expressed by the root form of the verb. For example, “I jumped.” The reader who stops in frustration, saying, “But when did the jump start? When did it finish?” has problems well beyond the scope of the content they’re reading.
If you’ve been doing yoga for six years, you could reasonably say, “I started doing yoga six years ago.” For you, yoga is an ongoing action with a concrete starting point. But when describing action in a story, there are few circumstances where “start” is effective.
Let’s take this case and look at the potential fixes:
He started screaming.
Is it a single scream? Use “He screamed.” Are you telling us his screams will be background noise for a while? Rather than clueing us in unnecessarily, show us the series of screams first-hand. Do you want to introduce a changed state, such as escalating from loud speaking into screaming? Show us the decibels, the gruffness of voice, the way the air feels to the person he’s screaming at, and the hot dryness in the screamer’s throat as his volume crescendos.
“That” is a useful word for adding clarity, but like Bibles on the bedstands of seedy motel rooms, the word’s presence is often out of place.
When “that” is employed to add a description, you can almost always move the description to before the term and make a more powerful image.
Ireland was nothing but flowing green hills that flowed green.
In many other cases, “that” can simply be dropped or replaced with a more descriptive term.
I was drunk the night that your father and I met.
Many other uses of “that,” such as “I wish I wasn’t that ugly”, can be enhanced with more descriptive language.
I’m not just saying that, like, you shouldn’t, like, talk like a valley girl (though that too). Here’s the problem: “Like” is used to show uncertainty. And you. Should. Not. Be. Uncertain.
Be bold. When making a comparison, use force. Use metaphor over simile. Don’t let yourself cop out by coming up with a halfway description.
My eyes rested on the gun for a sliver of a moment. I snapped forward, grabbed it, and it was like the chill metal flowed from the gun into my veins.
One of the 36 articles by the infamously fantastic Chuck Palahniuk dives into the issue of like in great detail. It’s well worth checking out.
As always, Orwell’s final rule applies: “Break any of these rules before saying anything barbarous.” There are instances where each of these words fills a valuable role. However, especially among inexperienced writers, these words are frequently molested and almost always gum up the works.
Apply these lessons immediately and consistently to empower your words. Then, with practice, you will suddenly realize that you are starting to naturally trim the text in order to create prose that is very powerful.
Good Morning, I’ve been on vacation in North Carolina and had an absolutely wonderful time visiting with my girlfriend. Since it rained the entire time I was there, we stayed in the house, laughed, talked of old times, old friends and ate lots of good food. A better vacation couldn’t have been found anywhere.
This article is from “The Write Life” originally published in July. I liked the fact it gives step by step instructions which will help Newbies as well as Old Timers. Enjoy and have a blessed day. Shirley
But where do you begin? Though you’ve got the writing part down, the rest of the process can be overwhelming. Hosting, themes and all that other techy stuff can stand in your way for years.
Well, today is the day that ends. We’re here to help you navigate every step of starting a blog, from choosing your domain name to publishing your first post.
Here’s how to start a blog as a writer:
1. Pick a domain name
First things first: Where are people going to find you online? As a writer, you are your brand, so we recommend using some variation of your name. To check availability, simply visit Bluehost and click on “new domain.”
If none of the obvious options are available, try tacking a “writer” onto the end of your name, as in susanshainwriter.com. You could also use a “.net” or “.biz” domain, but keep in mind that most people automatically type in “.com” before thinking of other endings.
You can, of course, opt for a creative blog name, but remember that your interests and target audience may change as the years go by. When I started blogging in 2012, I focused solely on adventure travel and named my blog Travel Junkette. Since then, I’ve expanded my niche and recently switched to susanshain.com — because my name won’t change, no matter what I’m blogging about. I wish I’d started out using my name as the domain, and would advise you not to make the same mistake I did.
Once you’ve settled on your domain (or domains, if you’re like a lot of us writerpreneurs!), don’t wait to buy it. Even if you’re not ready to start a blog right now, you don’t want to risk losing the domain you want.
Before you actually click “purchase,” though, you might want to read the next step; we’re going to tell you how to get your domain name for free.
2. Purchase a hosting package
Now that you’ve picked out your domain name, it’s time to choose a web host. Your hosting company does all the technical magic to make sure your site actually appears when people type your newly anointed domain name into their browser. In other words, it’s pretty important.
We use MediaTemple to host this blog, but it’s typically better for blogs with lots of traffic, so you probably don’t need that if you’re just starting out. For a new blog, try Bluehost. It’s used by top bloggers around the world and is known for its customer service and reliability. Bluehost’s basic hosting plan costs $3.95 per month — and as a bonus, the company throws in your domain name for free when you sign up.
Be sure to put your purchase (and all the purchases listed in this post) on a business credit card and keep those receipts; they are investments in your business and are therefore tax deductible.
3. Install WordPress
We’re almost through with the techy stuff, we promise! You have several different choices for blogging platforms, but we like WordPress best. Not only is it totally free, but it’s easy to learn, offers a wide variety of themes, and has an online community and lots of plugins that make blogging accessible to everybody.
You can read comprehensive instructions for installing WordPress on your new blog here. Once you’ve completed that, you can officially log into your blog and start making it look pretty.
Still too techy for you? Try WordPress.com (as opposed to WordPress.org). It’s a cinch to set up, but won’t allow you as much control over your site’s design and functionality. If you choose to go this route, you can skip steps one and two of this post. Simply visit WordPress.com and click on “Create website.” Though the free default inserts wordpress.com into your domain (susanshain.wordpress.com), you can pay to use your own domain(susanshain.com).
4. Put up an “under construction” sign
While working on your blog’s appearance, you might want to put up an “under construction” or “coming soon” sign to greet visitors. You don’t want any potential clients or readers to Google your name and find a half-finished site. (And you may think you’re going to finish setting up your blog tomorrow — but we all know how badly writers procrastinate when there are no looming deadlines!)
To set up a little sign that says “under construction,” just download this plugin. You could even include a link to your Twitter or Facebook page so visitors have an alternate way of getting in touch with you. When you’re ready to share your blog with the world, simply deactivate and delete this plugin.
5. Choose a theme
Now we’re getting to the fun stuff! Your theme determines what your blog looks like, and you’ve got a lot of options to choose from. Yes, there’s a wide range of free themes, but if you’re serious about blogging, the customization and support offered by paid themes can’t be beat.
Here at The Write Life, we use Genesis, which is one of the most popular premium themes available. Another popular and flexible theme is Thesis. For my personal site, I use Elegant Themes, which has a wide selection of beautiful themes at a reasonable price. All of these themes come with unlimited support — essential when you’re starting a blog.
6. Create a header
If you truly want your blog to look professional, it’s worth getting a custom header. You can ask your favorite graphic designer or create something yourself with Canva.
My favorite option? Order one on Fiverr. I’ve had great luck getting headers and other graphics designed in this online marketplace, where thousands of people offer their services for $5 per gig.
7. Write your pages
Though you’re starting a blog and not a static website, you’ll still want a few pages that don’t change. (“Pages” are different from “posts,” which are the daily/weekly/monthly entries you publish on your blog.)
Here are some pages you may want to create:
The about page is frequently touted as one of the most-viewed pages on blogs, so don’t overlook it. Include a photo and brief bio, and explain why you’re blogging and why the reader should care. What makes you an expert? How can you help them?
Don’t be afraid to let your personality shine through — blogging is a personal affair!
You want your readers to be able to get in touch with you, right? Then you’ll need a contact page.
It doesn’t have to be anything fancy; just tell your readers how best to reach you. Avoid putting your full email address on here, as spambots could get ahold of it. To work around that, you can use a plugin, which we’ll link to below, or simply write something like “yourname AT yoursite DOT com.”
It’s your blog, so flaunt what you’ve got! Show your prospective clients and readers that you deserve their time and attention with examples of your past and present work. You can see examples of great writer portfolios here; personally, I love Sara Frandina’s.
Do you have a list of favorite writing tools? Or maybe books that have inspired you? Readers love resources pages, and for bloggers, they can also be a way to earn income from affiliate sales. Check out The Write Life’s resources page for inspiration.
You probably won’t need this at first, but a “start here” page is smart once you have a decent amount of content. It’s a great opportunity to express your mission and highlight your best work, so your readers can see the value of your blog without wading through months or years worth of posts.
Joanna Penn does a good job with hers, encouraging readers to download her ebook and then choose a topic that interests them.
Work with me
If you’re using your new blog to sell your writing services, this page is crucial. Be clear about how you can help people and how they can get in touch with you. You could even list packages of different services, like Sarah Von Bargen does on her site.
Once you’ve set up all your pages, make sure they’re easily accessible from the home page. If they’re not showing up, you may have to adjust your menus.
8. Install plugins
Plugins are great for everybody, but they’re especially useful for those of us who are less comfortable with the technical side of things but who’ve managed to set up a self-hosted blog. Think of them as apps for your blog; they’re free tools you can install to do a variety of things.
Though having lots of plugins can undermine the functionality and security of your blog, there are several we recommend everyone look into:
Better Click-to-Tweet: Encourage readers to share your content by including a click-to-tweet box within your posts; this plugin makes it easy.
Contact Form 7: If you want to avoid putting your email address on your contact page, use this contact form plugin, which is frequently updated and receives good reviews.
QuickieBar: Want to get readers to sign up for your free newsletter? Or want to announce the release of your latest book? This plugin allows you to create a banner for the top of your blog.
Mashshare: These “Mashable-style” share buttons are like the ones you see here on The Write Life. Another popular option is Digg Digg. It doesn’t matter which plugin you choose; it’s just essential you make social sharing easy for your readers.
WP Google Analytics: This plugin tracks the visitors to your site so you can see what people are interested in and how they’re finding you.
WP Super Cache: Another plugin that’s not sexy, but is important. Caching allows your blog to load faster — pleasing both your readers and Google.
Yoast SEO: This all-in-one SEO plugin helps you optimize your posts so you can get organic traffic from search engines.
9. Install widgets
If your blog has a sidebar, you might want to spruce it up with a few widgets, which are small boxes with different functions.
Here are some ideas:
You’ve probably seen this on a lot of blogs; it’s a box in the upper right hand corner welcoming you to the site. Check out Jessica Lawlor’s blog for a simple — yet excellent — example.
Social media icons
Make it easy for your readers to follow you on social media by including links to your profiles in the sidebar. Here’s a basic tutorial for adding custom social media icons.
Once you’ve been blogging for a while, you might want to highlight your most popular posts in the sidebar, which you can do with a basic text widget. We do this here on The Write Life so you can find our most popular content quickly and easily.
10. Purchase backup software
Don’t overlook this important step just because you don’t have content yet! It’s better to install this software early than to start blogging and not remember until it’s too late.
Free options exist, but I’ve never had good luck with them — and for something as important as my entire blog, I don’t mind paying a little extra. (It’s a business write-off, remember?!) Popular backup options include VaultPress,BackupBuddy and blogVault.
11. Start your email list
I know, I know — you haven’t even started blogging and I already want you to build an email list. Trust me; you’ll be so glad you did.
Alexis Grant, founder of The Write Life, agrees with me. “If I could go back and do one thing differently for my business, it would be starting a newsletterearlier,” she writes. “My email list is THAT important for my business, bringing traffic to my website, buys of my products and opportunities I never could’ve expected.”
Our favorite email newsletter platform is Mailchimp. It’s intuitive, fun and free for up to 2,000 subscribers. There are lots of other tools you could choose, though; here are a few more options for building your email list.
Once you’ve created your list, entice your readers to subscribe by adding a subscription box to your sidebar, and maybe even installing a plugin likePopupAlly.
If you really want to start a blog, you’re going to need to… start blogging.
We recommend creating an editorial calendar — even if it’s just you blogging. It doesn’t have to be fancy; it can even be scribbled out in a notebook.
What’s important is that you plan your posts in advance, so you can keep track of your ideas and stick to a schedule. It’s also a chance to assess and tweak your content strategy. What do you want to write about? How will you draw the readers in?
Don’t forget you’re writing for the web, so your style should be different than if you were writing for print. Keep your tone conversational, use “you” phrases to speak to the reader and break up text with bullet points and sub-headers. Keep SEO in mind, but don’t make it the focus of your writing.
13. Promote, promote, promote
You’re almost there! Now that you’ve started writing, it’s time to get readers. And I hate to be the bearer of bad news, but for many writers, this is one of the most surprisingly time-consuming aspects of blogging. Though it’d be nice if we could just write (that’s what we love to do, right?), it’s nicer to have people actually reading your work.
Sometimes a little outside help is all the boost you need.
Other than that, creating a successful writing blog is about hard work and consistency. Keep posting helpful and engaging content, optimizing it for SEO and sharing it with your networks — and you’ll soon see your new blog start to blossom.
Congratulations, you’ve now officially started a blog as a writer. Guess it’s time to get writing!
Do you want to start a blog? What stood in your way until now?